Viết thử
Từ ChipFC Wiki
Tham khảo
Công thức toán học
<math>
\operatorname{erfc}(x) = \frac{2}{\sqrt{\pi}} \int_x^{\infty} e^{-t^2}\,dt = \frac{e^{-x^2}}{x\sqrt{\pi}}\sum_{n=0}^\infty (-1)^n \frac{(2n)!}{n!(2x)^{2n}}
</math>
$
\sum f(x) = F(x) + g(x)
$
Mã nguồn
<syntaxhighlight lang="cpp"> // your code here </syntaxhighlight>
/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.
This example code is in the public domain.
*/
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;
// the setup routine runs once when you press reset:
void setup() {
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
}
// the loop routine runs over and over again forever:
void loop() {
digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}
Danh sách bài viết
<DynamicPageList>
category=Bài viết hướng dẫn
count = 5
order = ascending
addfirstcategorydate = true
</DynamicPageList>
- 2014-02-09: Bắt đầu với Arduino
- 2014-02-24: Thư viện Arduino
- 2014-03-08: Lập trình Arduino
- 2014-10-30: Hướng dẫn cài đặt FTDI Driver bằng tay
- 2014-11-18: Ngôn ngữ Arduino
Viết tchú thích
Văn bản thứ nhất.<ref>Chú thích 1</ref>
Văn bản thứ hai.<ref>Chú thích 2</ref>
==Hiện chú thích==
<references />
Văn bản thứ nhất.[1] Văn bản thứ hai.[2]
Hiện chú thích