Khác biệt giữa các bản “Trang Chính”
Từ ChipFC Wiki
Dòng 1: | Dòng 1: | ||
'''MediaWiki đã được cài đặt thành công.''' | '''MediaWiki đã được cài đặt thành công.''' | ||
+ | |||
+ | <math> | ||
+ | \operatorname{erfc}(x) = | ||
+ | \frac{2}{\sqrt{\pi}} \int_x^{\infty} e^{-t^2}\,dt = | ||
+ | \frac{e^{-x^2}}{x\sqrt{\pi}}\sum_{n=0}^\infty (-1)^n \frac{(2n)!}{n!(2x)^{2n}} | ||
+ | </math> | ||
Xin đọc [//meta.wikimedia.org/wiki/Help:Contents Hướng dẫn sử dụng] để biết thêm thông tin về cách sử dụng phần mềm wiki. | Xin đọc [//meta.wikimedia.org/wiki/Help:Contents Hướng dẫn sử dụng] để biết thêm thông tin về cách sử dụng phần mềm wiki. |
Phiên bản lúc 10:36, ngày 9 tháng 2 năm 2014
MediaWiki đã được cài đặt thành công.
<math>
\operatorname{erfc}(x) = \frac{2}{\sqrt{\pi}} \int_x^{\infty} e^{-t^2}\,dt = \frac{e^{-x^2}}{x\sqrt{\pi}}\sum_{n=0}^\infty (-1)^n \frac{(2n)!}{n!(2x)^{2n}}
</math>
Xin đọc Hướng dẫn sử dụng để biết thêm thông tin về cách sử dụng phần mềm wiki.
Để bắt đầu
- Danh sách các thiết lập cấu hình
- Các câu hỏi thường gặp MediaWiki
- Danh sách gửi thư về việc phát hành MediaWiki
/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.
This example code is in the public domain.
*/
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;
// the setup routine runs once when you press reset:
void setup() {
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
}
// the loop routine runs over and over again forever:
void loop() {
digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}