Khác biệt giữa các bản “Trang Chính”
Từ ChipFC Wiki
Dòng 9: | Dòng 9: | ||
* [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce Danh sách gửi thư về việc phát hành MediaWiki] | * [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce Danh sách gửi thư về việc phát hành MediaWiki] | ||
− | <syntaxhighlight lang=" | + | <syntaxhighlight lang="cpp"> |
− | + | /* | |
− | + | Blink | |
− | + | Turns on an LED on for one second, then off for one second, repeatedly. | |
− | + | ||
− | + | This example code is in the public domain. | |
− | + | */ | |
− | + | ||
+ | // Pin 13 has an LED connected on most Arduino boards. | ||
+ | // give it a name: | ||
+ | int led = 13; | ||
+ | |||
+ | // the setup routine runs once when you press reset: | ||
+ | void setup() { | ||
+ | // initialize the digital pin as an output. | ||
+ | pinMode(led, OUTPUT); | ||
+ | } | ||
+ | |||
+ | // the loop routine runs over and over again forever: | ||
+ | void loop() { | ||
+ | digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level) | ||
+ | delay(1000); // wait for a second | ||
+ | digitalWrite(led, LOW); // turn the LED off by making the voltage LOW | ||
+ | delay(1000); // wait for a second | ||
+ | } | ||
</syntaxhighlight> | </syntaxhighlight> |
Phiên bản lúc 21:58, ngày 8 tháng 2 năm 2014
MediaWiki đã được cài đặt thành công.
Xin đọc Hướng dẫn sử dụng để biết thêm thông tin về cách sử dụng phần mềm wiki.
Để bắt đầu
- Danh sách các thiết lập cấu hình
- Các câu hỏi thường gặp MediaWiki
- Danh sách gửi thư về việc phát hành MediaWiki
/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.
This example code is in the public domain.
*/
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;
// the setup routine runs once when you press reset:
void setup() {
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
}
// the loop routine runs over and over again forever:
void loop() {
digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}