Khác biệt giữa các bản “Ghi chú VPS Centos and Plesk”
Từ ChipFC Wiki
(Tạo trang mới với nội dung “Category:Tài liệu ChipFC == Upgrade OS vendor PHP on CentOS 7 == https://support.plesk.com/hc/en-us/articles/115000438614-How-to-upgrade-OS-vendor…”) |
|||
| Dòng 4: | Dòng 4: | ||
https://support.plesk.com/hc/en-us/articles/115000438614-How-to-upgrade-OS-vendor-PHP-on-CentOS-7- | https://support.plesk.com/hc/en-us/articles/115000438614-How-to-upgrade-OS-vendor-PHP-on-CentOS-7- | ||
| − | 1. Connect to the server using SSH. | + | #1. Connect to the server using SSH. |
| − | 2. Enable EPEL repository: | + | #2. Enable EPEL repository: |
| + | |||
<code># yum install epel-release</code> | <code># yum install epel-release</code> | ||
3. Download Remi repository package: | 3. Download Remi repository package: | ||
| + | |||
<code># wget https://rpms.remirepo.net/enterprise/remi-release-7.rpm</code> | <code># wget https://rpms.remirepo.net/enterprise/remi-release-7.rpm</code> | ||
4. Enable Remi PHP repo: | 4. Enable Remi PHP repo: | ||
| + | |||
<code># rpm -ivh remi-release-7.rpm</code> | <code># rpm -ivh remi-release-7.rpm</code> | ||
5. Make sure yum-utils package is installed and enable appropriate Remi repository. As an example to upgrade OS vendor PHP to version 7 enable the following repository: | 5. Make sure yum-utils package is installed and enable appropriate Remi repository. As an example to upgrade OS vendor PHP to version 7 enable the following repository: | ||
| + | |||
<code># yum-config-manager --enable remi-php70</code> | <code># yum-config-manager --enable remi-php70</code> | ||
6. Update php package: | 6. Update php package: | ||
| + | |||
<code># yum update php</code> | <code># yum update php</code> | ||
Phiên bản lúc 00:00, ngày 21 tháng 3 năm 2018
Upgrade OS vendor PHP on CentOS 7
https://support.plesk.com/hc/en-us/articles/115000438614-How-to-upgrade-OS-vendor-PHP-on-CentOS-7-
- 1. Connect to the server using SSH.
- 2. Enable EPEL repository:
# yum install epel-release
3. Download Remi repository package:
# wget https://rpms.remirepo.net/enterprise/remi-release-7.rpm
4. Enable Remi PHP repo:
# rpm -ivh remi-release-7.rpm
5. Make sure yum-utils package is installed and enable appropriate Remi repository. As an example to upgrade OS vendor PHP to version 7 enable the following repository:
# yum-config-manager --enable remi-php70
6. Update php package:
# yum update php
