Trang Chính
Từ ChipFC Wiki
MediaWiki đã được cài đặt thành công.
Xin đọc Hướng dẫn sử dụng để biết thêm thông tin về cách sử dụng phần mềm wiki.
Để bắt đầu
- Danh sách các thiết lập cấu hình
- Các câu hỏi thường gặp MediaWiki
- Danh sách gửi thư về việc phát hành MediaWiki
/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.
This example code is in the public domain.
*/
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;
// the setup routine runs once when you press reset:
void setup() {
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
}
// the loop routine runs over and over again forever:
void loop() {
digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}